|
| |
TM 9-2320-364-34-3
16-248
16-38. LOAD HANDLING SYSTEM (LHS) HOOK REPLACEMENT (CONT).
NOTE
Perform Steps (2) through (6) on trucks equipped with CHU.
Perform Steps (7) through (10) on trucks not equipped with CHU.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in a well ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(2)
Apply antiseize compound to pivot pin (15).
(3)
Using lifting device, install hook (1) on hook arm (8) with pivot pin (15) two washers (14) and retaining
rings (13).
(4)
Apply antiseize compound to retaining pin (4).
(5)
Install retaining pin (4), retaining bracket (10) and snapper pin (9) on hook (1).
(6)
If removed, secure wire rope (12) to retaining bracket (10) and to chain of snapper pin (9) with swaging
sleeves (11).
13
15
14
1
10
11
11
9
12
13
14
8
4
|
