|
| |
TM 9-2320-364-34-3
16-286
16-43. LOAD HANDLING SYSTEM (LHS) MAIN MANIFOLD/BRACKET
REPLACEMENT (CONT).
(21)
Remove couplings (53) and (54) and two
preformed packings (55) from fittings (56).
Discard preformed packings.
(22)
Remove two nuts (57), elbow (49) and
elbow (52) from bracket (58).
(23)
Loosen four screws (59) and remove
cover (60) from LHS main junction box (11).
(24)
Remove four locknuts (61), screws (62) and
LHS main junction box (11) from LHS main
manifold assembly (4). Discard locknuts.
(25)
Remove eight screws (63), lockwashers (64)
and LHS main manifold bracket
assembly (4) from hydraulic manifold (65).
Discard lockwashers.
(26)
Heat screws (66) where installed to LHS
main manifold bracket assembly (4) with
propane torch.
Screws are extremely hot. Do not
touch screws without protective
gloves or severe burns to hands
could result.
(27)
Remove two screws (66), lockwashers
(67), washers (68) and spacers (69) from
LHS main manifold bracket assembly (4).
Discard lockwashers.
(28)
Remove switch (70) and preformed
packings (71) and (72) from hydraulic
manifold (65). Discard preformed packings.
(29)
Remove plug (73) and preformed
packing (74) from hydraulic manifold (65).
Discard preformed packing.
(30)
Remove two plugs (75) and preformed
packings (76) from hydraulic manifold (65).
Discard preformed packings.
(31)
Remove plug (77), and preformed
packing (78) from hydraulic manifold (65).
Discard preformed packing.
66
11
60
62
59
64
63
61
65
4
69
68
67
70
71
72
73
74
75
76
77
78
65
76
|
