|
| |
TM 9-2320-364-34-3
16-293
(40)
Apply hydraulic oil to preformed
packing (78).
(41)
Install preformed packing (78) and plug (77)
on hydraulic manifold (65). Tighten to 30
lb-ft (41 N.m).
(42)
Apply hydraulic oil to two preformed
packings (76).
(43)
Install two preformed packings (76) and
plugs (75) on hydraulic manifold (65).
Tighten to 8 lb-ft (11 N.m).
(44)
Apply hydraulic oil to preformed
packing (74).
(45)
Install preformed packing (74) and plug
(73) on hydraulic manifold (65). Tighten to
5 lb-ft (7 N.m).
(46)
Apply hydraulic oil to preformed packings (71) and (72).
(47)
Install preformed packings (71) and (72) and switch (70) on hydraulic manifold (65). Tighten to 20 lb-ft
(27 N.m).
(48)
Install hydraulic manifold (65) on left and right LHS main manifold brackets assembly (4) with eight
lockwashers (64) and screws (63).
Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in a well-ventilated area. If adhesive, solvent or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(49)
Coat threads of screws (66) with sealing
compound.
(50)
Install two spacers (69), washers (68),
lockwashers (67) and screws (66) on LHS
main manifold assembly (4). Tighten to 13
lb-ft (18 N.m).
(51)
Install LHS main junction box (11) on LHS
main manifold assembly (4) with four
locknuts (61) and screws (62). Tighten to 21
lb-in (3 N.m).
(52)
Install cover (60) on LHS main junction
assembly (4) and tighten screws (59).
66
11
60
62
59
64
63
61
65
4
69
68
67
70
71
72
73
74
75
76
77
78
65
76
|
