|
| |
TM 9-2320-364-34-3
16-303
c.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
NOTE
There are two arm assemblies.
Right side is shown.
(1)
Apply sealing compound to two bushings
(3).
(2)
Using removal/installation tool, install two
bushings (3) in arm assembly (2) flush with
outer surface.
(3)
Apply sealing compound to two bushings
(1).
(4)
Using removal/installation tool and press,
install two bushings (1) in arm assembly (2)
flush with outer surface.
d.
Follow-On Maintenance:
Install slider arm, (TM 9-2320-364-20).
END OF TASK
2
3
1
2
3
1
|
