|
| |
TM 9-2320-364-34-3
17-13
b.
Disassembly.
Matchmark both piston pumps and adapter prior to disassembly.
(1)
Remove four screws (1) from piston pump (2) and adapter (3).
(2)
Remove piston pump (2) from adapter (3).
(3)
Remove coupling (4) from piston pump (2).
(4)
Remove preformed packing (5) from piston pump (2). Discard preformed packing.
(5)
Remove two screws (6) from adapter (3) and piston pump (7).
(6)
Remove adapter (3) from piston pump (7).
(7)
Remove preformed packing (8) from adapter (3). Discard preformed packing.
Use care when removing retaining rings. Retaining rings are under spring tension and can
act as projectiles when released and could cause severe eye injury.
NOTE
Note position of seals prior to removal.
(8)
Remove and discard retaining ring (9) from piston pump (7).
(9)
Remove and discard seal (10) from main hydraulic shaft (11).
(10)
Remove plug (12) from piston pump (7).
(11)
Remove and discard seal (13) from piston pump (2).
(12)
Remove and discard two retaining rings (14) from piston pump (2).
(13)
Remove and discard seal (13) from piston pump (2).
(14)
Remove plug (15) from piston pump (2).
|
