|
| |
TM 9-2320-364-34-3
(34)
With the aid of an assistant, install pump
mount bracket (70) on crossmember (71) with
four screws (69) and four locknuts (68).
(35)
Loosen cable of cable winch (58) and
disconnect free pulley hook (67) from chain.
(36)
Remove nut (60) and lockwasher (61) from
screw (62).
(37)
Position screw (62) until screw is flush
with left side of left pulley (63).
(38)
Remove cable winch cables from
pulleys (63) and (64).
(39)
Install screw (62), lockwasher (61) and
nut (60) on roof mount pulley (51).
(40)
Disconnect end hook (65) from eye (66) of
cable winch (58).
|
