| |
TM 9-2320-364-34-3
13-7
NOTE
If truck is equipped with a self-
recovery winch, only remove five
screws and locknuts in Step (2).
(2)
Remove seven locknuts (1), two screws (6),
screws (7), three screws (8) and right tow
eye (5) from frame (9). Discard locknuts.
(3)
Remove seven locknuts (1), two screws
(10), screws (11), screws (12) and screw
(13) from left tow eye (4) and frame (14).
Discard locknuts.
Do not loosen locknuts more than
one full turn. Failure to do so may
cause steering gear to fall and
cause injury or death to personnel.
NOTE
Loosening two nuts on steering
gear mounting bracket is to relieve
tension on left tow eye.
(4)
Loosen two locknuts (1), one full turn on
screws (15), and steering gear mounting
bracket (16) and frame (14).
15
14
16
1
11
10
14
1
4
11
13
12
9
1
5
6
7
8
7
|