|
| |
TM 9-2320-364-34-3
17-38
17-5. MAIN HYDRAULIC SYSTEM ADJUSTMENT (CONT).
(22)
Remove test hose, adapter and test fitting from hose 2295 (5).
(23)
Remove metal cap and preformed packing (6) from port G8 on multifunction manifold (7). Discard
preformed packing.
(24)
Apply hydraulic oil to preformed packing (6).
(25)
Position preformed packing (6) on port G8.
(26)
Connect hose 2295 (5) to port G8.
(27)
Disconnect flowmeter, adapters, No. 16 test hoses, test fitting and test hose from hose 2935 (1) and
elbow (3).
(28)
Remove and discard preformed packing (2) from elbow (3).
(29)
Apply hydraulic oil to preformed packing (2).
(30)
Position preformed packing (2) on elbow (3).
(31)
Connect hose 2935 (1) to elbow (3) on high pressure filter (4).
(32)
Check main hydraulic reservoir oil level and add oil as necessary.
b.
Follow-On Maintenance:
Install left side noise panel, (TM 9-2320-364-20).
Install cab engine access panel, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
