|
| |
TM 9-2320-364-34-3
17-57
(3)
Loosen captive screw (7) and remove connector (8) from transit valve (9).
(4)
Position drain pan under transit valve (9).
(5)
Remove four screws (10), transit valve (9) and four preformed packings (11) from hydraulic manifold (12).
Discard preformed packings.
b.
Installation.
(1)
Apply hydraulic oil to four preformed packings (11).
(2)
Install four preformed packings (11) on transit valve (9).
(3)
Install transit valve (9) on hydraulic manifold (12) with four screws (10).
(4)
Install connector (8) on transit valve (9) and tighten screw (7).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(5)
Apply sealing compound to head of screw (7).
(6)
Install LHS main junction box cover (5) on
LHS main junction box (6) with four
lockwashers (4) and screws (3).
(7)
Connect two hose quick disconnects (1) on
main control box quick disconnects (2).
c.
Follow-On Maintenance:
Start engine, (TM 9-2320-364-10).
Operate LHS, (TM 9-2320-364-10).
Check for oil leaks, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Check hydraulic oil reservoir level,
(TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
