|
| |
TM 9-2320-364-34-3
17-70
17-13. LOAD HANDLING SYSTEM (LHS) HOOK ARM MANIFOLD REPAIR (CONT).
e.
Installation.
NOTE
Install cable ties as required.
(1)
Apply hydraulic oil to four preformed packings (22).
(2)
Install four preformed packings (22) on left and right manifolds (10) and (11).
(3)
Install left and right manifolds (10) and (11) on left and right cylinders (20) and (21) with eight
lockwashers (19) and screws (18).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(4)
Apply sealing compound in countersunk hole around head of eight screws (18).
(5)
Install hose 2281 (12) and hose 2891 (13) on two fittings (14) on left manifold (10).
(6)
Install hose 2882 (15) and 2892 (16) on two fittings (17) on right manifold (11).
(7)
Install two solenoid valve coils (8) on solenoid valves (9) with nuts (7).
(8)
Apply sealing compound to two nuts (7).
|
