|
| |
TM 9-2320-364-34-3
17-82
17-15. LOAD HANDLING SYSTEM (LHS) MAIN CYLINDER REPLACEMENT (CONT).
NOTE
Perform Step (3) if lube fitting was removed.
(3)
Install lube fitting (10) in main cylinder (1).
Main cylinder weighs 325 lbs (148 kg). Attach suitable lifting device prior to installation to
prevent possible injury to personnel.
(4)
Attach lifting device to main cylinder (1).
Use care when installing retaining rings. Retaining rings are under tension and can act as
projectiles when released causing injury to personnel.
(5)
With the aid of an assistant and using lifting device, install barrel end of main cylinder (1), pivot pins (7),
shim (8) and retaining ring (6) on compression frame (9).
(6)
Remove lifting device from main cylinder (1).
|
