|
| |
TM 9-2320-364-34-3
17-89
(6)
Position drain pan under left main cylinder manifold (7) and right main cylinder manifold (8).
The LHS hydraulic system operates at oil pressures up to 3,625 psi (24,994 kPa). Never
disconnect any hydraulic line or fitting without first dropping pressure to zero. Failure to
comply may result in serious injury or death to personnel.
NOTE
Tag and mark all hoses prior to removal.
Cap and plug all hydraulic hoses and fittings after disconnecting.
(7)
Press middle safe lowering button (3) to relieve hydraulic pressure.
(8)
Turn OFF ENGINE switch (2).
(9)
Remove hose 2889 (9), hose 2588 (10) and hose 2888 (11) from fittings (12) on left manifold (7).
(10)
Remove hose 2890 (13), hose 2887 (14) and hose 2666 (15) from fittings (16) on right manifold (8).
(11)
Remove eight screws (17), lockwashers (18) and left and right manifolds (7) and (8) from left and right
main cylinders (6) and (19). Discard lockwashers.
(12)
Remove and discard four preformed packings (20) from left and right manifolds (7) and (8).
|
