|
| |
TM 9-2320-364-34-3
17-96
17-17. HYDRAULIC RETURN MANIFOLD REPAIR (CONT).
a.
Removal.
NOTE
Remove cable ties as required.
Tag and mark hoses prior to removal.
Cap and plug hoses after removal.
(1)
Position drain pan under hydraulic return manifold (1).
(2)
Remove hose 2904 (2) and preformed packing (3) from adapter (4). Discard preformed packing.
(3)
Remove hose 2724 (5) and preformed packing (6) from adapter (7). Discard preformed packing.
(4)
Remove hose 2917 (8) and preformed packing (9) from elbow (10). Discard preformed packing.
(5)
Remove hose 2886 (11) and preformed
packing (12) from adapter (13). Discard
preformed packing.
(6)
Remove hose 2918 (14) and preformed
packing (15) from elbow (16). Discard
preformed packing.
(7)
Remove two locknuts (17), two screws (18)
and hydraulic return manifold (1) from
mounting bracket (19). Discard locknuts.
|
