|
| |
TM 9-2320-364-34-3
17-98
17-17. HYDRAULIC RETURN MANIFOLD REPAIR (CONT).
c.
Assembly.
NOTE
Install elbows and adapters as noted prior to removal.
(1)
Position hydraulic return manifold (1) in soft-jawed vise.
(2)
Apply hydraulic oil to two preformed packings (4).
(3)
Install two preformed packings (4) and elbows (7) and (8) in hydraulic return manifold (1).
NOTE
If truck is equipped with crane, adapter will be installed in Step (5).
If truck is not equipped with crane, plug will be installed in Step (5).
(4)
Apply hydraulic oil to preformed
packings (4).
(5)
Install preformed packing (4) and
adapter (5) or plug (6) in hydraulic return
manifold (1).
(6)
Apply hydraulic oil to two preformed
packing (4).
(7)
Install two preformed packings (4) and
adapters (2) and (3) in hydraulic return
manifold (1).
(8)
Remove hydraulic return manifold (1) from
soft-jawed vise.
d.
Installation.
NOTE
Perform Step (1) only if bracket
was removed.
(1)
With the aid of an assistant, install tie-down
ring assembly (22) and mounting
bracket (19) on frame (23) with four
screws (21) and locknuts (20).
|
