|
| |
TM 9-2320-364-34-3
17-104
17-18. HYDRAULIC MULTIFUNCTION MANIFOLD/BRACKET REPAIR (CONT).
NOTE
Perform Steps (15) and (16) only
if bracket is damaged.
(15)
Loosen two locknuts (43) and screws (44)
on bracket (45).
(16)
With the aid of an assistant, remove four
locknuts (46), two screws (47), screws (48)
and mounting bracket (42) from fender
(49). Discard locknuts.
b.
Disassembly.
NOTE
Note location and position of
valves, couplings, retainers,
adapters and plugs.
(1)
Remove two nuts (1) and solenoids (2)
and (3) from solenoid valves (4) and (5).
(2)
Remove solenoid valves (4) and (5), four
packing retainers (6) and preformed
packings (7) and (8) from manifold (9).
Discard preformed packings and packing
retainers.
(3)
Remove needle valve (10), two packing
retainers (11) and preformed packings (12)
and (13) from manifold (9). Discard
preformed packings and packing retainers.
(4)
Remove two needle valves (14), four
retainers (15), two preformed packings (16),
four packing retainers (17), two preformed
packings (18) and preformed packing (19)
from manifold (9). Discard preformed
packings and packing retainers.
(5)
Remove needle valve (20), two packing
retainers (21), preformed packing (22), two
packing retainers (23), preformed
packing (24) and preformed packing (25)
from manifold (9). Discard preformed
packings and packing retainers.
(6)
Remove plug (26) and preformed
packing (27) from manifold (9).
|
