|
| |
TM 9-2320-364-34-3
17-111
(33)
Apply hydraulic oil to preformed
packings (12) and (13) and two packing
retainers (11).
(34)
Install preformed packings (13) and (12),
two packing retainers (11) and needle
valve (10) in manifold (9).
(35)
Apply hydraulic oil to four preformed
packings (8) and (7) and four packing
retainers (6).
(36)
Install preformed packings (8) and (7), four
packing retainers (6) and solenoid valves
(4) and (5) in manifold (9).
(37)
Install solenoids (2) and (3) on solenoid
valves (4) and (5) with two nuts (1).
e.
Installation.
NOTE
Install cable ties as required.
Perform Steps (1) through
(3) only if bracket was
removed.
(1)
With the aid of an assistant, install mounting
bracket (42) on fender (49) with two
screws (47), screws (48) and four
locknuts (46).
(2)
Remove and discard two locknuts (43) from
screws (44).
(3)
Install two locknuts (43) and screws (44) on
bracket (45).
|
