|
| |
TM 9-2320-364-34-3
17-118
17-19. DIVERTER BLOCK REPAIR (CONT).
e.
Installation.
NOTE
Install cable ties as required.
(1)
Apply hydraulic oil to two preformed
packings (15).
(2)
Position two coupling nuts (11), sleeves (17),
bushings (16) and preformed packings (15)
on tubes (13) and (14).
(3)
Position diverter block (1) on tubes (13)
and (14).
(4)
Install two coupling nuts (11) on
adapters (12).
(5)
Install diverter block (1) on bracket (10)
using three washers (9), lockwashers (8) and
screws (7).
(6)
Install hose 2892 (5), hose 2881 (4), hose
2882 (3) and hose 2891 (2) on four
adapters (6).
f.
Follow-On Maintenance:
Fill hydraulic reservoir,
(TM 9-2320-364-20).
Start engine and run for 3 minutes,
(TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Check for oil leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
