|
| |
TM 9-2320-364-34-3
18-4
18-2. ENGINE ARCTIC KIT INSTALLATION (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(14)
Apply sealing compound to threads of
water temperature sensor (2).
(15)
Install water temperature sensor (2) to
reducer (3).
(16)
Connect MC71 connector (1).
(17)
Open front access cover (12).
(18)
Route hose (11) down along left side of
bracket (13) and towards front access
cover (12).
(19)
Remove screw (14) and locknut (15) from
chassis air front gladhand bracket (13).
Discard locknut.
(20)
Install bracket (16) on bracket (13) with
screw (14) and locknut (15).
|
