|
| |
TM 9-2320-364-34-3
18-62
18-5. MACHINE GUN KIT INSTALLATION (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(15)
Apply sealing compound on threads of screw (30).
(16)
Install four washers (31), sleeve (32), screw (30), washers (33), spacer (34), washer (35), lockwasher
(36) and nut (37) on power module right frame (27). Tighten nut to 170 lb-ft (231 N.m).
(17)
Tighten screw (25) to 128 lb-ft (174 N.m) on rear support (26).
(18)
Install bracket (38) on rear support (26) with four screws (39) and locknuts (40).
|
