|
| |
TM 9-2320-364-34-3
18-67
NOTE
Rear stowage box bracket in Step
(2) was removed in Equipment
Conditions.
(2)
Install rear stowage box bracket (4), screw
(5), screw (6) and two locknuts (7) to
crossmember bracket (1).
(3)
Remove screw (8) and locknut (9) from
crossmember bracket (1). Discard screw and
locknut.
(4)
Position rear fuel tank bracket (10) on
frame (11) and crossmember bracket (1),
with three 2.25 in. (5.715 cm) screws (12),
locknuts (13), 2 in. (5.08 cm) screws (14)
and locknuts (15).
(5)
Tighten locknuts (13) to 375 lb-ft (508
N.m). Tighten locknuts (15) to 210 lb-ft
(285 N.m).
1
4
5
6
7
10
12
13
11
14
15
7
1
9
8
|
