|
| |
TM 9-2320-364-34-3
18-69
(9)
Remove four lower screws (22) and
locknuts (23) from crossmember bracket
(24) and frame (11). Discard screws and
locknuts.
(10)
Remove screw (25) and locknut (26) from
deck weldment (27) and frame (11).
Discard screw and locknut.
NOTE
If truck is equipped with CHU
kit, spacers will not be present in
Step (11).
(11)
Install spacer (28), two spacers (29) and
front fuel tank bracket (30) on frame (11),
crossmember bracket (24) and deck
weldment (27) with four 2.25 in. (5.715
cm) screws (31), locknuts (32), 2.75 in.
(6.985 cm) screw (33) and locknut (34).
(12)
Tighten four locknuts (32) to 210 lb-ft
(285 N.m). Tighten locknut (34) to
375 lb-ft (508 N.m).
NOTE
Front stowage box bracket
in Step (13) is from
auxiliary fuel tank kit.
If truck is equipped with
CHU kit, spacer will not be
present in Step (13).
(13)
Install spacer (35) and front stowage box
bracket (36) on frame (11) with two screws
(37) and locknuts (38).
22
23
24
28
29
30
31
32
33
34
35
36
37
38
25
26
27
11
11
24
27
11
|
