|
| |
TM 9-2320-364-34-3
18-78
18-6. AUXILIARY FUEL TANK KIT INSTALLATION (CONT).
(49)
Remove drain plug (84) from main fuel tank (77).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Do not coat last two threads of
fittings with sealing compound.
Sealing compound will
contaminate fuel system and
cause damage to equipment.
(50)
Apply sealing compound to threads of
reducer (85).
(51)
Install reducer (85) in main fuel tank (77).
(52)
Attach hose 2320 (86) to reducer (85).
(53)
Apply sealing compound to threads of
elbow (87), adapter (88), and safety valve
(89).
NOTE
Ensure elbow, fuel shutoff valve
and check valve are positioned as
shown.
(54)
Assemble elbow (87), fuel shutoff valve
(90), adapter (88) and safety valve (89).
(55)
Position fuel shutoff valve (90) between
two muffler clamps (91) and install on fuel
tank guard (92) with four lockwashers (93)
and nuts (94).
77
85
86
84
89
88
90
87
91
94
93
92
91
|
