|
| |
TM 9-2320-364-34-3
13-26
Materials/Parts
Cable Ties (Item 9, Appendix B)
Locknut (24) (Item 166, Appendix E)
Locknut (Item 167, Appendix E)
Locknut (7) (Item 176, Appendix E)
Locknut (2) (Item 177, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Driveshaft between Axle No. 2 and transfer case
removed, (TM 9-2320-364-20)
No. 2 and No. 3 air reservoirs removed,
(TM 9-2320-364-20)
Crane removed (if equipped), (Para 16-2)
Auxiliary fuel tank removed (if equipped),
(TM 9-2320-364-20)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
13-7. INTERMEDIATE CROSSMEMBER NO. 1 REPLACEMENT.
a.
Removal.
NOTE
Remove cable ties as required.
(1)
Remove two locknuts (1), screws (2), cushion clips (3) and cushion clips (4) from crossmember (5).
Discard locknuts.
(2)
Remove two locknuts (6), screws (7) and cushion clips (8) from crossmember (5). Discard locknuts.
|
