|
| |
TM 9-2320-364-34-3
13-28
13-7. INTERMEDIATE CROSSMEMBER NO. 1 REPLACEMENT (CONT).
(8)
Remove eight locknuts (26) and screws (27) from bottom of two brackets (28) and crossmember (5).
Discard locknuts.
(9)
With the aid of an assistant, remove eight locknuts (26) and screws (27) from top of two brackets (28)
and remove crossmember (5). Discard locknuts.
(10)
Remove crossmember (5) from bracket (28).
(11)
With the aid of an assistant, remove eight locknuts (29), screws (30) and two brackets (28) from frame
(21). Discard locknuts.
b.
Installation.
NOTE
Install cable ties as required.
(1)
With the aid of an assistant, install two brackets (28) on frame (21) with eight screws (30) and
locknuts (29).
(2)
Position crossmember (5) in two brackets (28).
(3)
With the aid of an assistant, position eight screws (27) in top of two brackets (28) and crossmember (5)
with eight locknuts (26).
(4)
With the aid of an assistant, install eight screws (27) in bottom of two brackets (28) and crossmember (5)
with eight locknuts (26).
(5)
Tighten eight locknuts (26) on screws (27) in top of two bracket (28).
|
