|
| |
TM 9-2320-364-34-3
13-32
13-8. INTERMEDIATE CROSSMEMBER NO. 2 REPLACEMENT (CONT).
(4)
Remove eight locknuts (10) and screws (11) from upper brackets (12) and crossmember (5). Discard
locknuts.
(5)
Remove eight locknuts (10) and screws (13) from lower brackets (14) and crossmember (5). Discard
locknuts.
(6)
With the aid of an assistant, remove crossmember (5) from upper and lower brackets (12) and (14).
(7)
Remove four locknuts (15) and screws (16) from upper and lower brackets (12) and (14) and frame (17).
Discard locknuts.
NOTE
Center hole in top right bracket is left open for stowage box installation.
(8)
Remove eight locknuts (15), screws (18) and upper and lower brackets (12) and (14) from frame (17).
Discard locknuts.
b.
Installation.
NOTE
Center hole in top right bracket is left open for stowage box installation.
Install cable ties as required.
(1)
Install upper and lower brackets (12) and (14) on frame (17) with eight screws (18) and locknuts (15).
(2)
Install four screws (16) in frame (17) and upper and lower brackets (12) and (14) with four locknuts (15).
(3)
With the aid of an assistant, position crossmember (5) in upper and lower brackets (12) and (14).
(4)
Install eight screws (13) in lower brackets (14) and crossmember (5) with eight locknuts (10).
(5)
Install eight screws (11) in upper bracket (12) and crossmember (5) with eight locknuts (10).
|
