|
| |
TM 9-2320-364-34-3
18-179
Horizontal roller weighs 75 lbs.
(34 kg). Attach suitable lifting
device prior to installation to
prevent possible injury to
personnel.
NOTE
Reuse roller, screw, locknut
and thrust washer from
removal of horizontal roller.
Lock plates can be found in
box B, pack no. 46 of CHU
kit crate.
Both rollers are installed the
same way. Right side shown.
(188)
Attach lifting device to roller (213).
(189)
With the aid of an assistant, position
roller (213) in right rear roller bracket
(125).
(190)
Install two screws (214), lockwashers (215)
and lockplate (216) in right rear roller
bracket (125).
NOTE
Locknut is installed properly
when locknut is tightened and
roller does not bind.
(191)
Install thrust washer (217), lockwasher
(218), and locknut (219) on roller (213).
(192)
Bend tab of lockwasher (218) into slot of
locknut (219).
(193)
Remove lifting device from roller (213).
(194)
Repeat Steps (188) through (193) for left
side of truck.
213
125
216
215
217
219
218
214
213
|
