|
| |
TM 9-2320-364-34-3
18-187
NOTE
Rear hard lift struts are in
box D, pack no. 29 of CHU
kit crate.
Hard lift slider bracket,
tether, swaging sleeve and
pin are in box B, pack no. 37
and 38 of CHU kit crate.
(230)
Position rear hard lift strut (275) in front
hard lift strut (276) and install pin (277)
and quick disconnect pin (278).
(231)
Install pin (279), quick disconnect pin
(280) and rear hard lift strut (275) on rear
roller bracket (116).
(232)
Install pin (281), quick disconnect pin
(282), hard lift slider bracket (283) and
front hard lift strut (276) on strut bracket
(147).
NOTE
Wire tether is properly installed
when positioned through loop in
snapper pin.
(233)
Install wire tether (284) to snapper pin
(285) with swaging sleeve (286).
(234)
Install snapper pin (285) in hard lift
slider bracket (283).
NOTE
Wire tether is properly installed
when positioned through front
hole of hard lift slider bracket
and hole in pin.
(235)
Position wire tether (284) through hard lift
slider bracket (283) and install to pin (281)
with swaging sleeve (286).
(236)
Install hard lift slider bracket (283) on front
hard lift strut (276) and strut bracket (147)
with pin (281) and quick disconnect pin
(282).
(237)
Repeat Steps (230) through (236) for left
side of truck.
147
282
281
285
286
283
276
277
276
275
278
279
116
284
286
280
|
