|
| |
TM 9-2320-364-34-3
13-38
13-10. REAR TANDEM CROSSMEMBER/GUSSET REPLACEMENT (CONT).
(11)
With the aid of an assistant, remove four
locknuts (21) and screws (31) from two
angles (32) and rear tandem
crossmember (15). Discard locknuts.
NOTE
If rear cable tensioner was
removed, Step (12) will only
remove six screws and locknut.
(12)
With the aid of an assistant, remove eight
locknuts (21), screws (31) and two
angles (32) from right rear tandem
gusset (24) and frame (28). Discard
locknuts.
(13)
Remove quick edge (33) from rear tandem
crossmember (15). Discard quick edge.
(14)
With the aid of an assistant, remove four
locknuts (21) and screws (34) from two
angles (32) and rear tandem
crossmember (15). Discard locknuts.
(15)
With the aid of an assistant, remove six
locknuts (21), two screws (31), four
screws (34) and angles (32) from left rear
tandem gusset (23) and frame (28).
Discard locknuts.
(16)
Remove rear tandem crossmember (15)
from right and left rear tandem gussets (23)
and (24).
|
