|
| |
TM 9-2320-364-34-3
13-40
13-10. REAR TANDEM CROSSMEMBER/GUSSET REPLACEMENT (CONT).
c.
Lower Left Gusset Replacement.
(1)
Removal.
Do not remove upper and
lower gussets at the same
time. Removal of both
gussets could cause
damage to vehicle parts due to
possible shifting.
NOTE
Tag and mark all screws prior to
removal.
(a)
Remove three locknuts (1) and screws
(2) from spring mounts (3), spacers (4)
and (5) and lower gusset (6). Discard
locknuts.
(b)
With the aid of an assistant, remove
eight locknuts (7) and screws (8) from
spring mounts (3), frame (9) and lower
gusset (6). Discard locknuts.
(c)
With the aid of an assistant, remove
three locknuts (10), screws (11) and
lower gusset (6) from frame (9).
Discard locknuts.
(2)
Installation.
NOTE
Ensure all spacers are on top of spring mounts before installing lower gusset.
All screws must be installed in original locations.
(a)
With the aid of an assistant, position lower gusset (6) and spacers (4) and (5) on frame (7) and
install three screws (11) with locknuts (10).
(b)
With the aid of an assistant, install eight screws (8) in spring mounts (3), frame (9) and lower
gusset (6) with eight locknuts (7).
(c)
Install three screws (2) in lower gusset (6), spacers (4) and (5) and spring mounts (3) with three
locknuts (1)
|
