|
| |
TM 9-2320-364-34-3
18-251
(117)
Connect connector (181) on oil pressure
sensor (135).
(118)
Remove screw (182) from engine (42).
Adhesive, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(119)
Apply sealing compound to threads of
screw (182).
(120)
Install DDEC III wire harness (180) in clip
(183) and close clip.
(121)
Install clip (183) on engine (42) with screw
(182). Tighten to 30 to 35 lb-ft (41 to 47
N.m)
(122)
Install DDEC III wire harness (180) in clip (127) and close clip.
(123)
Connect connector (184) on oil temperature sensor (129).
|
