|
| |
TM 9-2320-364-34-3
18-266
18-14. CONVERT DDEC II ENGINE ASSEMBLY TO DDEC III ENGINE ASSEMBLY
(CONT).
(185)
Position engine lifting bracket (3) on front
balance cover (6) with lockwashers (2) and
(5) and screws (4) and (1).
(186)
Tighten screw (1) on engine lifting bracket
(3) to 71 to 75 lb-ft (96 to 102 N.m).
(187)
Tighten screw (4) on engine lifting bracket
(3) to 53 to 56 lb-ft (72 to 76 N.m).
(188)
Tighten screw (1) on engine lifting bracket
(3) to 103 to 110 lb-ft (140 to 149 N.m).
(189)
Tighten screw (4) on engine lifting bracket
(3) to 71 to 75 lb-ft (96 to 102 N.m).
b.
Follow-On Maintenance:
Install secondary fuel filter, (TM 9-2320-364-20).
Install left rocker cover, (TM 9-2320-364-20).
Install right rocker cover, (TM 9-2320-364-20).
Fill cooling system, (in truck only), (TM 9-2320-364-20).
Connect batteries, (in truck only), (TM 9-2320-364-20).
Start engine, (in truck only), (TM 9-2320-364-10).
Check for leaks, (in truck only), (TM 9-2320-364-10).
Shut off engine, (in truck only), (TM 9-2320-364-10).
Close engine cover, (in truck only), (TM 9-2320-364-10).
Install right front fender skirt, (in truck only), (TM 9-2320-364-20).
Install cab engine access panel, (in truck only), (TM 9-2320-364-20).
Install left front splash guard, (in truck only), (TM 9-2320-364-20).
Install electronic control box (ECB) right access panel, (in truck only), (TM 9-2320-364-20).
Install left front noise panel, (in truck only), (TM 9-2320-364-20).
Install right side noise panel, (in truck only), (TM 9-2320-364-20).
Install left side noise panel, (in truck only), (TM 9-2320-364-20).
Remove wheel chocks, (in truck only), (TM 9-2320-364-20).
|
