|
| |
TM 9-2320-364-34-3
18-279
Remove all jewelry such as rings, dog
tags, bracelets, etc. If jewelry contacts
battery terminal, a direct short may
result in instant heating of tools, damage
to equipment, and injury or death to
personnel.
(67)
Position wire 151/953 (80) of DDEC II to
DDEC III kit harness through hole (81) in
battery box (82).
NOTE
Perform Steps (68) and (69)
for trucks equipped with 200
amp alternator.
Perform Steps (70) and (71)
for trucks equipped with 145
amp alternator.
(68)
Position screw (75), washer (76), cable
1137 (79), cable 1138 (78), wire 208/209
(72), wire 150/150 (71), wire 151/953 (83),
washer (69), lockwasher (68), and nut (67)
on negative terminal (77).
(69)
Tighten nut (67) to 12 to 16 lb-ft (16 to 22
N.m).
(70)
Position washer (76), screw (75), cable
(74), cable (73), wire 208/209 (72), wire
150/150 (71), wire 1275 (70), wire 151/953
(83), washer (69), lockwasher (68), and nut
(67) on negative terminal (77).
(71)
Tighten nut (67) to 12 to 16 lb-ft (16 to 22
N.m).
Corrosion compound contains alkali.
Do not get in eyes; wear goggles/safety
glasses when using. Avoid contact with
skin. In case of contact, immediately
wash area with soap and water. If eyes
are contacted, flush eyes with large
amounts of water at least 15 minutes
and get immediate medical attention.
(72)
Apply corrosion preventative compound to
terminal (77).
|
