|
| |
TM 9-2320-364-34-3
19-3
(9)
Remove eight screws (11) and ECB
cover (12) from ECB (13).
(10)
Remove plastic hole plug (14) from
ECB (13).
(11)
Install grommet (15) on ECB (13).
(12)
Install GPFU wire harness (16) through
grommet (15).
(13)
Connect connector (17) to MC58
connector (18).
(14)
Install ECB cover (12) on ECB (13) with
eight screws (11).
(15)
Remove screw (19) from roof support (20).
(16)
Install bracket (22) on roof support (20)
with screw (19).
Use care when installing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
(17)
Install orifice connector assembly (21) to
bracket (22) with retaining ring (23).
(18)
Install hose (24) to quick release
coupling (25) with hose clamp (26).
(19)
Install quick release coupling (25) on
orifice connector assembly (21).
|
