|
| |
TM 9-2320-364-34-4
28-63
NOTE
Leave one hole empty between
every two springs.
(8)
Install piston assembly (2) and six springs (3)
in cylinder housing (4).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Position elbow as noted prior to
removal.
(9)
Apply sealing compound to threads of
elbow (1) and install in cylinder housing (4).
END OF TASK
|
