| |
TM 9-2320-364-34-4
28-66
28-11. OUTRIGGER CYLINDER REPAIR (CONT).
(8)
Remove setscrew (16) from cylinder barrel (17).
Cylinder must not be dented when held in vise, or leakage and improper operation may result.
(9)
Place cylinder barrel (17) in chain vise with wooden blocks.
(10)
Remove wear ring (18) from cylinder head (19). Discard split ring.
(11)
With the aid of an assistant, pull cylinder rod (3) out of cylinder barrel (17). Allow hydraulic fluid to
drain into drain pan.
NOTE
Cylinder head is threaded.
(12)
Remove cylinder head (19) and cylinder rod (3) from cylinder barrel (17).
(13)
Remove cylinder head (19) from cylinder rod (3).
NOTE
Note position of seal assemblies and ring.
(14)
Turn cylinder rod (3) around and remove two seal assemblies (21) and ring (20) from piston (22).
Discard seal assemblies, and ring.
|