|
| |
TM 9-2320-364-34-4
28-68
28-11. OUTRIGGER CYLINDER REPAIR (CONT).
NOTE
Both outrigger cylinders are assembled the same way.
(1)
Apply hydraulic oil to buffer seal assembly (28) and two wear rings (27) and install in cylinder head (19).
(2)
Apply hydraulic oil to backup ring (26) and preformed packing (25) and install on outside of cylinder
head (19).
(3)
Install cylinder head (19) on cylinder rod (3).
(4)
Install spacer (24) with drilled hole facing threaded end of cylinder rod (3).
(5)
Install piston (22) on cylinder rod (3).
(6)
Install cylinder rod (3) in vise with soft jaws.
(7)
Tighten piston (22) on cylinder rod (3) until setscrew holes are aligned.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(8)
Apply sealing compound on threads of setscrew (23).
(9)
Install setscrew (23) in piston (22).
(10)
Apply hydraulic oil to backup ring (29), preformed packing (30) and backup ring (29) and install on
piston (22).
|
