|
| |
TM 9-2320-364-34-4
28-70
28-11. OUTRIGGER CYLINDER REPAIR (CONT).
(18)
Apply hydraulic oil to backup ring (15) and preformed packing (14) and install on holding valve (10).
(19)
Apply hydraulic oil to preformed packing (13) and two backup rings (12) and install on holding valve (10).
(20)
Apply hydraulic oil to preformed packing (11) and holding valve (10) and install on cylinder rod (3) side
marked “P”.
(21)
Tighten holding valve (10) to 50 to 55 lb-ft (68 to 75 N.m).
(22)
Apply hydraulic oil to preformed packing (9) and backup ring (8) and install on check valve (4).
(23)
Apply hydraulic oil to preformed packing (7) and two backup rings (6) and install on check valve (4).
(24)
Apply hydraulic oil to preformed packing (5) and check valve (4) and install on cylinder rod (3).
(25)
Apply hydraulic oil to preformed packing (2).
(26)
Install preformed packing (2) and plug (1) on cylinder rod (3).
END OF TASK
|
