|
| |
TM 9-2320-364-34-4
28-85
Materials/Parts
Oil, Hydraulic (Item 34, Appendix B)
Solvent, Drycleaning (Item 68, Appendix B)
Lockwasher (12) (Item 234, Appendix E)
Packing, Preformed (Item 395, Appendix E)
Seal (Item 573, Appendix E)
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Self-Recovery Winch motor end support removed,
(Para 28-15)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Compressor Unit, Air (Item 35, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Gun, Airblow (Item 86, Appendix F)
Press, 60 Ton (Item 164, Appendix F)
Puller Kit, Universal, Slide Hammer
(Item 175, Appendix F)
Wrench, Torque (0-175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
28-16. SELF-RECOVERY WINCH MOTOR END HUB REPAIR.
a.
Removal.
(1)
Remove and discard seal (1) from motor end
hub (2).
(2)
With the aid of an assistant, remove 12
screws (3) and lockwashers (4) from motor
end hub (2) and ring gear (5). Discard
lockwashers.
(3)
With the aid of an assistant, remove motor
end hub (2) from ring gear (5).
|
