|
| |
TM 9-2320-364-34-4
20-78
20-31. FLYWHEEL HOUSING AND REAR OIL SEAL REMOVAL (CONT).
(15)
Remove two screws (26) from flywheel
housing (1).
(16)
Remove screw (27) through access hole
from flywheel housing (1). Discard screw.
(17)
Remove six screws (28) from flywheel
housing (1).
(18)
Remove six screws (29) and washers (30)
from flywheel housing (1) on engine (31).
Flywheel housing weighs 187 lbs
(85 kg). Attach suitable lifting
device prior to removal to
prevent possible injury to
personnel.
(19)
Remove two screws (32), washers (33) and
flywheel housing (1) from cylinder block
plate (34) and position on clean work
surface.
(20)
Remove gasket (35) from cylinder block
plate (34) and flywheel housing (1). Discard
gasket.
(21)
Remove lifting device and lifting eyes from
flywheel housing (1).
|
