|
| |
TM 9-2320-364-34-4
20-112
20-44. ENGINE BRAKE RETARDER REPAIR (CONT).
(12)
Apply lubricating oil to preformed
packing (15).
(13)
Install preformed packing (15) in supply
housing (8).
(14)
Apply lubricating oil to preformed
packings (13) and (14).
(15)
Install preformed packings (13) and (14) on
solenoid valve (12).
NOTE
Solenoid is used on supply
housing only.
(16)
Install solenoid valve (12) in supply
housing (8). Tighten to 50 lb-in (6 N.m).
(17)
Install setscrew (17) with nut (16) in supply
housing (8).
(18)
Apply lubricating oil to control valve (11).
(19)
Install control valve (11), springs (10)
and (9) in supply housing (8).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(20)
Apply sealing compound to screw (6).
(21)
Install control valve cover (7) with screw (6)
in supply housing (8). Tighten screw to 110
lb-in (12 N.m).
|
