|
| |
TM 9-2320-364-34-4
20-153
(2)
Install pilot in injector tube installer through
bottom of cylinder head (2).
(3)
Tap pilot to loosen injector tube (1) from
cylinder head (2).
(4)
Remove injector tube (1), preformed
packing (3), pilot, and installer from
cylinder head (2). Discard injector tube and
preformed packing.
b.
Assembly.
NOTE
All eight injector tubes are
installed the same way.
Injector tube must be
reamed before injectors can
be installed.
(1)
Wipe debris from injector tube (1) and
cylinder head counterbore (2) with cleaning
cloth.
(2)
Install preformed packing (3) into cylinder
head counterbore (2).
(3)
Using injector tube installer, tap injector
tube (1) into cylinder head counterbore (2)
until bottom rim of installer is flush with
cylinder head (4).
|
