| |
TM 9-2320-364-34-4
20-220
20-64. ENGINE CYLINDER BLOCK REPAIR (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(32)
Coat plug (9) with sealing compound.
(33)
Install plug (9) in right side of engine
block (5). Tighten plug 168 to 192 lb-in
(19 to 22 N.m).
(34)
Coat oil gallery plug (11) with sealing
compound.
(35)
Using pipe plug driver, install oil gallery
plug (11) in engine block (5). Tighten plug
120 to 144 lb-in (14 to 16 N.m).
(36)
Coat drain cock (10) with sealing compound.
(37)
Install drain cock (10) in engine block (5).
(38)
Coat plugs (12) and (13) with sealing
compound.
(39)
Install plugs (12) and (13) in right side of
engine block (5). Tighten plug 75 to 85
lb-ft (102 to 115 N.m).
(40)
Coat oil gallery plug (2) with sealing
compound.
(41)
Install oil gallery plug (2) in rear end of
engine block (5). Tighten plug 23 to 27
lb-ft (31 to 37 N.m).
(42)
Coat oil gallery plug (8) with sealing
compound.
(43)
Install oil gallery plug (8) in rear end of
engine block (5). Tighten plug 33 to 37
lb-ft (45 to 50 N.m).
|