|
| |
TM 9-2320-364-34-4
20-241
(4)
Coat gasket (15) with grease and position on engine block (16).
(5)
Coat sealing lip with grease and install flywheel cover (12) on engine block (16).
(6)
Install two screws (13) and lockwashers (14).
(7)
Tighten two screws (13) 80 to 90 lb-ft (108 to 122 N.m).
(8)
Position trunnion (5) against flywheel
cover (12).
(9)
Install four lockwashers (7) and
screws (6) in trunnion (5).
(10)
Position two lockwashers (9) and
screws (8) in trunnion (5).
(11)
Position two lockwashers (11) and
screws (10) in trunnion (5).
(12)
Tighten screws (8) and (10) 30 to
35 lb-ft (41 to 47 N.m).
(13)
Tighten screws (6) 70 to 75 lb-ft
(95 to 102 N.m).
|
