|
| |
TM 9-2320-364-34-4
20-271
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
NOTE
Perform Steps (6) and (7) if plugs were removed.
(6)
Coat threads of plug (12) and plug (11) with sealing compound.
(7)
Install plug (12) and plug (11) in oil pan (1).
NOTE
Ensure ends of end plate gaskets are trimmed flush with surface of block.
(8)
Coat threads of adapter (10) with sealing compound.
(9)
Install adapter (10) in oil pan (1).
(10)
Apply grease to mating surface of oil pan (1).
(11)
Install gasket (8) on engine block (9).
(12)
Position oil pan (1) on gasket (8).
(13)
Position four screws (5) in support bracket (6).
(14)
Apply sealing compound to threads of 20 oil pan screws (7).
(15)
Position 20 screws (7) in sides and front of oil pan (1).
|
