|
| |
TM 9-2320-364-34-4
20-291
Never install used compression
gaskets, they will cause
compression leaks.
NOTE
Color side of seal strip is
installed facing away from
cylinders.
(2)
Install four compression gaskets (21), 16
water seals (19), oil seal (20) and seal strip
gasket (18) in engine block (15).
NOTE
Shims are installed in same
position and location as noted
during removal.
(3)
Remove paper covering from back of two
support shims (22) and install glued side
down on engine block (15).
(4)
Install two cylinder head guide studs into
two bottom corners of cylinder block (15).
|
