|
| |
TM 9-2320-364-34-4
20-312
20-95. BLOWER ASSEMBLY INSTALLATION (CONT).
(14)
Position gasket (12) and blower drive hub
cover (7) on flywheel housing (13).
(15)
Install three lockwashers (6) and screws (5)
in blower drive hub cover (7).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(16)
Coat threads of two screws (8) with sealing
compound.
(17)
Install two screws (8) in blower drive hub
cover (7). Tighten to 30 to 35 lb-ft
(41 to 47 N.m).
(18)
Install screw (11) in blower drive hub
cover (7) with lockwasher (10) and nut (9).
Tighten screw to 30 to 35 lb-ft (41 to 47 N.m).
(19)
Tighten clamp (4).
(20)
Coat threads of blower lube line (1) with
sealing compound and install between
blower (2) and blower drive hub (3).
b.
Follow-On Maintenance:
Install tachometer drive assembly,
(Para 20-96).
END OF TASK
|
