|
| |
TM 9-2320-364-34-4
20-332
20-104. ELECTRONIC CONTROL MODULE (ECM) INSTALLATION (CONT).
(2)
Connect two connectors (141) and (142) to the timing and synchronous reference sensor (TRS/SRS) (143).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(3)
Coat threads of fuel temperature sensor (139) with sealing compound.
(4)
Install fuel temperature sensor (139) in tee (140).
(5)
Connect connector (138) to fuel temperature sensor (139).
|
