|
| |
TM 9-2320-364-34-4
20-342
20-104. ELECTRONIC CONTROL MODULE (ECM) INSTALLATION (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
NOTE
Perform Steps (46) through (50) for DDEC III engines.
(46)
Apply sealing compound to threads of DDEC engine oil pressure sensor (58), tee (59) and reducer (60).
(47)
Install reducer (60) in engine (36).
(48)
Install tee (59) in reducer (60).
(49)
Install DDEC engine oil pressure sensor (58) on tee (59).
(50)
Connect connector (57).
|
