|
| |
TM 9-2320-364-34-4
20-362
20-106. REMOVING ENGINE FROM STAND (CONT).
(71)
Install bracket (32) on engine (12) with two
washers (31), lockwashers (30) and
screws (29).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(72)
Apply sealing compound to threads of
elbow (28).
(73)
Install elbow (28) in engine block (12).
(74)
Install filler hose 2999 (23) on elbow (28).
(75)
Position clamp (26) on filler hose 2999 (23)
and install clamp (26) on bracket (27) with
screw (25) and locknut (24).
(76)
Position two clamps (17) and (21) on filler
tube (14).
(77)
Position filler tube (14) on filler hose
2999 (23).
(78)
Install bracket (6), clamp (21), screw (20)
and locknut (19) to bracket (22).
(79)
Install clamp (17), screw (16) and
locknut (15) to bracket (18).
(80)
Install filler cap (13) on filler tube (14).
|
