|
| |
TM 9-2320-364-34-4
21-17
NOTE
Rotor to rotor measurements must be measured one in. (2.54 cm) from each end and at
center of blower.
Add shims behind driven gear to increase (C) clearance.
(39)
Measure clearances between rotor lobes at points (C). Minimum clearance is 0.013 in. (0.330 mm).
NOTE
Placing 0.003 in. (0.076 mm) shim behind gear rotates rotor 0.001 in. (0.025 mm).
Add shims behind drive gear to increase (CC) clearance.
(40)
Measure clearances at points (CC). Minimum clearance is 0.013 in. (0.330 mm).
|
